




































XXL vehicle wrap 200cm x 135cm
motive
campidoo vehicle wrap XXL
Customize the rear of your vehicle with our giant vehicle wraps. Measuring 135cm high and 200cm wide, we cover virtually every vehicle on the market.
The base material of this high-quality adhesive film effortlessly covers existing stickers and prevents colors from showing through (the outlines remain clearly visible). Thanks to its air-channel adhesive structure , it features a kind of ventilation system that allows for bubble-free application, even for beginners .
If the area to be covered on the camper is smaller, this film can easily be cut to size.
In the text field, you can enter your desired text. "Off to the seaside," for example. We will then print this prominently and attractively on the foil and gladly send you a preview by email.
Quick gluing instructions:
Clean the camper's rear with glass cleaner or soapy water. If your finger squeaks on the paint, it's ready. If you need to cut in certain areas, here's an expert tip: mask these areas with masking tape. Use two layers if you like. This way, when you need to cut carefully with a sharp cutter, you won't damage the paint. But please use high-quality masking tape, not the cheap stuff from the checkout.
With the help of an assistant, you now position the foil as it should sit and secure it with adhesive tape several times all around.
At the edge of the film, cut the first set of fixing strips about a third of the way from the right so you can fold the film over. Now peel off the backing paper and fold it once flat – you can now slide it under the fixed film and, starting from the folded area, smooth the film down towards the edge with a squeegee. Slowly from top to bottom, holding the squeegee at approximately a 45° angle.
If a crease has crept in, you can carefully lift the foil again and again.
Then, you continue pulling a piece of paper downwards, slowly smoothing it down until you reach the end. By looking flat at the surface, you can detect any bubbles. You can also use reflections from the mirror image to help with this.
You will now have masked off the cutting areas on the left and right with tape. Make sure the foil is neatly pressed into the corner with a squeegee. Then, cut precisely at an angle with the knife ON TOP of the underlying tape. Finally, remove any remaining tape and, ideally, warm the edge area again with a heat gun.
As a rough guide: you shouldn't need more than 30-45 minutes for this.
If you want to apply the film outdoors, make sure the temperature is good and there's little wind. 15-17°C is ideal (even at night) so the film can adhere properly. A local vehicle wrapping company will also be happy to help and apply the film for you.
Breite: 200cm
Höhe: 135 cm
Reinigung & Pflege:
We are Campidoo ❤️
Hi, I'm Florian!













Über uns
Magazin
Kontakt